Pure and Transparent Naphthenic Base White Mineral Oil

• Customization: Available
• Type: Refined Oil
• Key Features: High Temperature Resistance
• Model NO.: 680#
• Chief Constituents: Naphthenic Base
• Status: Liquid
• Usage: Raw Materials, Fuel, Sealing, Gear Oil, Chain Oil, Pad, Lubricantgrease
• Production Methods: Distillation
• Packaging: Drum
• Technique Data: Viscosity
• Color: Colorless, Transparent, Crystal Clear
• Class: High
• Processing Stage: 3 Grade Hydrogenation, Deeply Refined
• Eco-Friendly: Yes
• Transport Package: Drum, IBC Tank, Flexitank, Liquid Container
• Specification: 170kg, 850kg, 20t
• Trademark: HRPC
• Origin: China
• HS Code: 3812200000
• Production Capacity: 30000 Tons/Year

Product Description

Pure and Transparent Naphthenic Base White Mineral Oil - 680#

 

1. Product Introduction

This product takes crude oil as raw material, after decompression distillation cuts out the appropriate fraction, then through the high pressure hydrogenation combination  process.

2. Product Specification
 

Analysis Items	680#	Test Method
Appearance	Colorless, Odorless, Clear oily liquid	Visual Test
Kinematic Viscosity (40ºC), mm^2/s	612~748	GB/T 265
Kinematic Viscosity (100ºC), mm^2/s	-	GB/T 265
Viscosity Index	-	GB/T 1995
Density (20ºC), kg/m^3	Report	SH/T 1884
Flash Point (Opening), ºC	≮260	GB/T 3536
Pour Point, ºC	≯-9	GB/T 3535
Seibert Color	≮+30	GB/T 3555
Acid, mg(KOH)/g	-	GB/T 4945
Oxidation Stability    (ROBT)150ºCmin	-	SH/T 0193
Saturates, %(m/m)		SH/T 0753
Sulfur, ug/g		SH/T 0253
Water Content, %	NO	GB/T 260

The above technical parameters only represent the typical data of standardized brand products, the specific products shall be subject to the actual contract provisions.

3. Product Feature

1) Deep hydrogenation refined white oil, very low smell.
2) Low viscosity, excellent low temperature fluidity, high saturated hydrocarbon content, extremely low aromatic hydrocarbon content.
3) Excellent water separation, electrical insulation and oxidation resistance.
4) Good environmental performance.

4. Product Consideration

All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.

Storage & preservation: It must be placed in cool and ventilated place. Insolation and moisture are prohibitied.

5. Product Application

The oil can be applicated to seal/sealing/gasket/pad, EPDM material, gear oil, chain oil, lubricant grease.



6. Product Packing




7. Contact