Bottom Oil for Making Lubricating and Industrial Oil

• Type: Paraffin
• Key Features: High Temperature Resistance
• Status: Liquid
• Usage: Raw Materials, High Grade Transparent Sole Material
• Production Methods: Distillation
• Packaging: Drum
• Model NO.: 150N
• Technique Data: Viscosity
• Transport Package: Drum, IBC Tank, Liquid Container
• Specification: 170kg, 850kg, 20t
• Trademark: HRPC
• Origin: China
• HS Code: 3812200000
• Production Capacity: 30000 Tons/Year

Product Description

Bottom Oil for Making Lubricating and Industrial Oil  - 150N

 

1. Product Introduction

With crude oil as raw material, the product is cut into suitable distillate through atmospheric and vacuum distillation, and then produced by high pressure hydrogenation combination process.

2. Product Specification
 

Analysis Items	150N	Test Method
Appearance	Clear	Visual Test
Kinematic Viscosity (40ºC),mm^2/s	28~34	GB/T 265
Kinematic Viscosity (100ºC),mm^2/s	Report	GB/T 265
Viscosity Index	≮100	GB/T 1995
Density (20ºC), kg/m^3	Report	SH/T 1884
Flash Point (Opening), ºC	≮205	GB/T 3536
Pour Point, ºC	≯-15	GB/T 3535
Seibert Color	+30	GB/T 3555
Acid, mg(KOH)/g	≯0.010	GB/T 4945
Oxidation Stability                                           (ROBT)150ºC min	≮300	SH/T 0193
Saturates, %(m/m)	≮97	SH/T 0753
Sulfur, ug/g	≯10.0	SH/T 0253
Water Content, %	NO	GB/T 260

The above technical parameters only represent the typical data of standardized brand products, the specific products shall be subject to the actual contract provisions.

3. Product Feature

1)Deep hydrogenation products have high saturated hydrocarbon content and lowest aromatic hydrocarbon and harmful impurity                content.
2) Good low temperature fluidity and electrical insulation.
3) Good oxidation stability, excellent water separation and anti -

4. Product Consideration

All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.

Storage & preservation: It must be placed in cool and ventilated place. Insolation and moisture are prohibitied.

5. Product Application



6. Product Packing




7. Contact