Environment Friendly Top Level Tyre Processing Tdae Oil

• Type: Refined Oil
• Key Features: High Temperature Resistance
• Chief Constituents: Aromatic Base
• Status: Liquid
• Usage: Raw Materials, Rubber Tire, Gear Oil, Normal Rubber, Black Shoe Sole
• Production Methods: Distillation
• Model NO.: A1020
• Packaging: Drum
• Technique Data: Viscosity
• Color: Light Brown
• Base: Arene
• Processing Stage: Hydrogenation
• Eco-Friendly: Yes
• Transport Package: Drum, IBC Tank, Flexitank, Liquid Container
• Specification: 170kg, 850kg, 20t
• Trademark: HRPC
• Origin: China
• HS Code: 3812200000
• Production Capacity: 30000 Tons/Year

Product Description

Environment Friendly Top Level Tyre Processing TDAE Oil - A1020

 

1. Product Introduction

The product takes crude oil as raw material, after decompression distillation cuts adopts atmospheric and vacuum distillation the reduced pressure to cut out the appropriate fraction, via the high pressure hydrogenation combination process, to produce the ultimate aim product.

2. Product Specification
 

Analysis Items	A1020	Test Method
Kinematic Viscosity (40ºC), mm^2/s	840.4	GB/T 265
Kinematic Viscosity (100ºC), mm^2/s	16-26	GB/T 265
Density (20ºC), kg/m^3	Report	SH/T 1884
Flash Point (Opening), ºC	≥210	GB/T 3536
Pour Point, ºC	≤+15	GB/T 3535
PCA, %	<3.0	NB/SH/T 0835
Sum of 8 PAHS, mg/kg	≤10	SH/T 0193

The above technical parameters only represent the typical data of standardized brand products, the specific products shall be subject to the actual contract provisions.

3. Product Feature

1) Deep hydrogenation refined white oil, very low smell.
2) Low viscosity, excellent low temperature fluidity, high saturated hydrocarbon content, extremely low aromatic hydrocarbon content.
3) Excellent water separation, electrical insulation and oxidation resistance.
4) Good environmental performance.

4. Product Consideration

All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.

Storage & preservation: It must be placed in cool and ventilated place. Insolation and moisture are prohibitied.

5. Product Application



6. Product Packing




7. Contact