White Soft Plastic Intermediate Based Blend Oil - 10#
1. Product Introduction
The product takes petroleum as raw material, after decompression distillation cuts adopts atmospheric and vacuum distillation the reduced pressure to cut out the appropriate fraction, via the high pressure hydrogenation combination process, to produce the ultimate aim product.
2. Product Specification
| Analysis Items |
10# |
Test Method |
Kinematic Viscosity
(40ºC), mm2/s |
9~11 |
GB/T 265 |
| Density (20ºC), kg/m3 |
- |
GB/T 1884 |
| Pour Point,ºC |
≯3 |
GB/T 3535 |
| Flash Point (Closed), ºC |
≮140 |
GB/T 3536 |
| Seibert Color |
≮+20 |
GB/T 3555 |
| Appearance |
Colorless
Odorless, Clear oily liquid |
Visual Test |
| Water Content,% |
None |
GB/T 260 |
| Mechanical Impurities,% |
None |
GB/T511 |
| Water-Soluble Acid Or Alkali |
None |
GB/T259 |
The above technical parameters only represent the typical data of standardized brand products, the specific products shall be subject to the actual contract provisions.
3. Product Feature
1) Deep hydrogenation refined white oil, very low smell.
2) Low viscosity, excellent low temperature fluidity, high saturated hydrocarbon content, extremely low aromatic hydrocarbon content.
3) Excellent water separation, electrical insulation and oxidation resistance.
4) Good environmental performance.
4. Product Consideration
All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
Storage & preservation: It must be placed in cool and ventilated place. Insolation and moisture are prohibitied.
5. Product Application
6. Product Packing
We offer sea freight through major shipping lines, with insured shipments and real-time tracking to ensure your peace of mind.
7. Contact
Contact us for product details, technical support, or to place an order-our team is here to meet all your rubber process oil requirements.
Audited Supplier 
){kind=link}