Rubber Plasticizer Aromatic Base White Mineral Oil - A1020
1. Product Introduction
The product takes crude oil as raw material, after decompression distillation cuts adopts atmospheric and vacuum distillation the reduced pressure to cut out the appropriate fraction, via the high pressure hydrogenation combination process, to produce the ultimate aim product.
2. Product Specification
Analysis Items |
A1020 |
Test Method |
Kinematic Viscosity
(40ºC), mm2/s |
840.4 |
GB/T 265 |
Kinematic Viscosity
(100ºC), mm2/s |
16-26 |
GB/T 265 |
Density (20ºC), kg/m3 |
Report |
SH/T 1884 |
Flash Point (Opening), ºC |
≥210 |
GB/T 3536 |
Pour Point, ºC |
≤+15 |
GB/T 3535 |
PCA, % |
<3.0 |
NB/SH/T 0835 |
Sum of 8 PAHS, mg/kg |
≤10 |
SH/T 0193 |
The above technical parameters only represent the typical data of standardized brand products, the specific products shall be subject to the actual contract provisions.
3. Product Feature
1) Deep hydrogenation refined white oil, very low smell.
2) Low viscosity, excellent low temperature fluidity, high saturated hydrocarbon content, extremely low aromatic hydrocarbon content.
3) Excellent water separation, electrical insulation and oxidation resistance.
4) Good environmental performance.
4. Product Consideration
All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
Storage & preservation: It must be placed in cool and ventilated place. Insolation and moisture are prohibitied.
5. Product Application
The oil can be applicated to tire/tyre, gear oil, normal rubber, black shoe sole materials.
6. Product Packing
7. Contact